DC Motor Brushless DC Motor Three Phase Motor With Electronic Control For Fan Use
| Rated voltage | 24VDC |
| Operating voltage | 21.6~26.4VDC |
| Rated load | 180mN.m |
| Rated speed(on load) | 2400+/- 10% RPM |
| Rated current(on load) | 2.2A max |
| Rotation direction | CW(view from shaft side) |
| Working duty | continuous |
| Position detection method | FOC |
| Insulation resistance | 10MΩmin. (500VDC) |
| Dielectric strength | 600VAC/1S leakage current <=5mA |
| Temperature rise | <75K |
| Speed control |
PWM PWM frequency: 15KHZ ~ 20KHZ PWM amplitude: 3.3~5.0V (Min >2.6V, Max <5.5V) Duty cycle: 1%~99% L level: 0~1.0V; H level: 2~5.5V; |
| Detecting method of motor speed |
FG signal L level: 0~0.5V; H level: 4.5~5.5V; Max input/output current :5mA |
| Locked-rotor protection | When the motor rotor and output shaft are locked, the motor lock protection function starts to work, the motor output is closed, and the motor output current is returned to Zero, the motor stops working. |
| Current limit function | When the current in the motor circuit exceeds 3.0 A, the motor will be protected and stopped. |
| Circuit Protection | This motor does not have over-voltage and reverse connection protection circuit, please pay attention not to apply wave exceeding the rated voltage when using Surge voltage or reverse connection. |
|
Temperature and humidity test (without condensation) |
Motor must be left at the temperature range of -20°C to 60°C and the relative humidity range of 5% to 90% for 72 H. and then returns to room temperature 12 hours. Measurement of the rated load speed and rated load current must be conformed to standard. |
| Vibration test (without packing) |
No error should occur after test . Direction of vibration: front and rear, right and left, up and down. Vibration acceleration: 9.8m/s²(sine eave) vibration Frequency range: 50Hz~50Hz~50Hz Repeating period: 1Min Vivrating Time:30cycle(30min) each direction. |
| Vibration test (packing) |
No error should occur after test at the mimimum package test condition. Direction of vibration: front and rear, right and left, up and down. Vibration acceleration:9.8m/s²(sine eave) vibration Frequency range: 50Hz~50Hz~50Hz Repeating period: 1Min Vivrating Time:30cycle(30min) each direction. |
| Shock test(packaging) |
No error should occur after test at the minimum package. Drop height: 50CM Impact shock is applied 1 time for bottom surface. |
Drawing:
Application: Humidifier, Air purifier
