Piston Compressor Nebulizer Motor Low Noise Nebulizer Pump 25mm Stack CL.B
This kind of pump motor is composed by shaded pole motor with piston pump. Most of the parts are produced by our own factory- stack stamping, die-casting, motor shaft, plastic part injection. In this case, we can shorten the lead time and gurantee the parts' quality.
Single Phase Shaded Pole motor is mainly composed of core, primary and secondary windings, rotor, stator and bobbin. Secondary winding is the short-circuiting ring, producing magnetic potential and forming a rotating magnetic field in the air gap. Rotor is made up of core and squirrel cage conductor. The function of squirrel cage conductor is to induce current and electromagnetic torque, realizing the conversion of electricity and motion energy.
Specification:
| Rated voltage/frequency V/HZ | 230V 50HZ |
| Rated current A | 0.50A max |
| Rated input power W | 60W max |
| Starting voltage V | 200V max |
| Working air pressure PSI | 9.5PSI min |
| Rated flow rate L/M | 5.5L/M min |
| Max pressure PSI | 34PSI min |
| Insulation resistance | The cold insulation resistance between stator and terminal shall be more than 100MΩ(tested by DC 500V megger) |
| Dielectric strength | It shall be enough to withstand with application AC 1800V/2mA/1s. No puncture. |
| Life | At rated load, 20 mins on, 40 mins off as one cycle. 1000 hours min. |
Drawing:
Application: Piston Compressor nebulizer
