25mm Nebulizer Motor With Pump Piston Compressor Nebulizer Motor Ball Bearing
Specification:
| Rated voltage/frequency V/HZ | 220V 50HZ |
| Working air pressure PSI | 8PSI min |
| Rated flow rate L/H | 300L/H min |
| Max pressure PSI | 35PSI min |
| Protection | Thermal protector 150℃ |
| Piston bearing | Ball bearing |
| Insulation resistance | The cold insulation resistance between stator and terminal shall be more than 100MΩ(tested by DC 500V megger) |
| Dielectric strength | It shall be enough to withstand with application AC 1800V/2mA/1s. No puncture. |
| Life | At rated load, 20 mins on, 40 mins off as one cycle. 1000 hours min. |
Drawing:
Drawing:
Application: Piston Compressor nebulizer
